Using Microcontroller for Intelligent Production Control System


Abstract views: 55 / PDF downloads: 46

Authors

  • Adem Golcuk Selçuk University

Keywords:

Microcontroller, Inductive Sensor, Control System, Smart Electronic Systems

Abstract

Computer-aided solutions have become indispensable due to the effective use of both software and hardware units. Computer-aided production is indispensable for today's industry as it can use software and hardware units effectively. One of the most important components of smart hardware systems is microcontrollers. Microcontrollers are widely used in smart electronic systems due to their low cost, small size and programmability. In this study, a microcontroller-controlled smart electronic system is designed to count and pack the products produced by a machine that produces metal products. This machine, which produces metal products, is controlled by the designed electronic system. Production control in the electronic system is carried out with a microcontroller. PIC18F4550 microcontroller is used in the designed electronic system. Pic C programming language was used to prepare the microcontroller software. With the keyboard module designed for the electronic system, the number of products that the machine should produce can be adjusted. In addition, the operator can follow the production process of the machine from the LCD screen placed on the electronic system. The products produced by the machine are detected by the inductive sensor connected to the microcontroller and the microcontroller calculates the number of products produced. When the number set by the operator and the number calculated by the microcontroller are the same, the production of the machine is stopped. Production starts again when the operator places a new work order on the machine. 

Author Biography

Adem Golcuk, Selçuk University

Faculty of Technology, Turkey

References

M. Karaköse, M. BAYGIN, İ. AYDIN, A. SARIMADEN, and A. Erhan, "Endüstriyel Sistemlerde Arkaplan Çıkarımı Tabanlı Hareketli Nesne Tespiti ve Sayılması için Yeni Bir Yaklaşım," Muş Alparslan Üniversitesi Fen Bilimleri Dergisi, vol. 4, no. 2, 2016.

Y. SEVİM, "RFID READER İLE KİMLİK TANIMLAMA SİSTEMİ," 2012.

İ. ÇOLAK, R. BAYINDIR, and S. KURUŞÇU, "PLC KONTROLLÜ ASANSÖR EĞİTİM SETİ TASARIMI VE UYGULAMASI," 2007.

N. Aydemir, "RF haberleşmeli trafik yoğunluğu analiz sistemi uygulaması," Pamukkale Üniversitesi Fen Bilimleri Enstitüsü, 2008.

M. Erk. "Endüktif Sensör." http://www.trerk.com/teknik/12/enduktif_sensor/index.html (accessed.

A. Golcuk, M. Buber, and R. Kursun, "Design and Implementation of a Microcontroller Controlled Digital Mahya," presented at the International Conference on Advanced Technology & Sciences (ICAT’16), Konya-Turkey, September 01-03, 2016, 2016.

A. Golcuk, "Design and implementation of a hybrid FLC+ PID controller for pressure control of sleep devices," Biomedical Signal Processing and Control, vol. 76, p. 103702, 2022.

A. Golcuk, "Hybrid Fuzzy Expert System and Difference Equation Software Filter for Biomedical Sensors," IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1-12, 2022.

A. GÖLCÜK, M. BALCI, S. TASDEMIR, S. KÜÇÇÜKTÜRK, H. VATANSEV, and H. VATANSEV, "Designing a System that Records the Sleeping Position Data of Sleep Apnea Patients," Gazi Mühendislik Bilimleri Dergisi, vol. 8, no. 1, pp. 130-134, 2022.

A. Gölcük, H. Işık, and İ. Güler, "Design and construction of a microcontroller-based ventilator synchronized with pulse oximeter," Journal of Medical Systems, vol. 40, pp. 1-10, 2016.

Microchip. "PIC18F2455/2550/4455/4550 Data Sheet." http://ww1.microchip.com/downloads/en/devicedoc/39632c.pdf (accessed 20 Jan,2016.

Downloads

Published

2023-02-13

How to Cite

Golcuk, A. (2023). Using Microcontroller for Intelligent Production Control System. International Conference on Frontiers in Academic Research, 1, 174–177. Retrieved from https://as-proceeding.com/index.php/icfar/article/view/64