A Review: Methods and Fillers for Recycling Polystyrene
Abstract views: 52
/ 
PDF downloads: 39
Keywords:
Polystyrene, Synthetic Polymer, Organic Filler, Recycling, Forest ResourceAbstract
Today, with the rapidly increasing human population, the need for wood has become impossible
to meet from forests. For this reason, people established industrial plantations. In addition, substitute
polymers that can be used instead of wood raw material have been developed. One of these is polystyrene
(PS) wood mixture composite materials. PS is one of the most used thermoplastic polymers in the world.
PS is a petroleum-derived synthetic polymer and takes a long time to recycle in nature. For this reason,
many researchers are working on the possibilities of recycling and reusing polystyrene. Some methods have
been developed for this purpose. In these methods used, PS can be strengthened by using different fillers.
The fact that these fillers are natural is also important as it reduces the degradation rate of PS in nature.
Studies on this subject will help both preserve the ecological balance and use petroleum-derived materials
efficiently. This is an important issue in terms of protecting the world we live in. In this study, recycling
methods of PS and natural polymers used as fillers are compiled.
Downloads
References
I. Maafa, “Pyrolysis of Polystyrene Waste: A Review,” Polymers, vol. 13, no. 2, p. 225, Jan. 2021.
M. Burgess, H. Holmes, M. Sharmina, and M. P. Shaver, “The future of UK plastics recycling: One Bin to Rule Them All,” Resources, Conservation and Recycling, vol. 164, p. 105191, Jan. 2021.
C. W. S. Yeung, J. Y. Q. Teo, X. J. Loh, and J. Y. C. Lim, “Polyolefins and Polystyrene as Chemical Resources for a Sustainable Future: Challenges, Advances, and Prospects,” ACS Materials Letters, vol. 3, no. 12, pp. 1660–1676, Dec. 2021.
M. Y. Khalid, Z. U. Arif, W. Ahmed, and H. Arshad, “Recent trends in recycling and reusing techniques of different plastic polymers and their composite materials,” Sustainable Materials and Technologies, vol. 31, p. e00382, Apr. 2022.
F. R. Beltrán, G. Gaspar, M. Dadras Chomachayi, A. Jalali-Arani, A. A. Lozano-Pérez, J. L. Cenis, M. U. de la Orden, E. Pérez, and J. M. Martínez Urreaga, “Influence of addition of organic fillers on the properties of mechanically recycled PLA,” Environmental Science and Pollution Research, vol. 28, no. 19, pp. 24291–24304, May 2021.
R. Scaffaro, A. Di Bartolo, and N. Tz. Dintcheva, “Matrix and Filler Recycling of Carbon and Glass Fiber-Reinforced Polymer Composites: A Review,” Polymers, vol. 13, no. 21, p. 3817, Nov. 2021.
O. Kelleci, D. Aydemir, E. Altuntas, A. Oztel, R. Kurt, H. Yorur, and A. Istek, “Thermoplastic composites of polypropylene/biopolymer blends and wood flour: Parameter optimization with fuzzy-grey relational analysis,” Polymers and Polymer Composites, vol. 30, p. 096739112211009, Jan. 2022.
S. Aksu, O. Kelleci, D. Aydemir, and A. Istek, “Application of acrylic-based varnishes reinforced with nano fillers for conservation of weathered and worn surfaces of the historical and cultural wooden buildings,” Journal of Cultural Heritage, vol. 54, pp. 1–11, Mar. 2022.
B. D. Vogt, K. K. Stokes, and S. K. Kumar, “Why is Recycling of Postconsumer Plastics so Challenging?,” ACS Applied Polymer Materials, vol. 3, no. 9, pp. 4325–4346, Sep. 2021.
M. Larrain, S. Van Passel, G. Thomassen, B. Van Gorp, T. T. Nhu, S. Huysveld, K. M. Van Geem, S. De Meester, and P. Billen, “Techno-economic assessment of mechanical recycling of challenging post-consumer plastic packaging waste,” Resources, Conservation and Recycling, vol. 170, p. 105607, Jul. 2021.
N. Ebner and E. Iacovidou, “The challenges of Covid-19 pandemic on improving plastic waste recycling rates,” Sustainable Production and Consumption, vol. 28, pp. 726–735, Oct. 2021.
Y. Wang, H. Wang, P. Wang, X. Zhang, Z. Zhang, Q. Zhong, F. Ma, Q. Yue, W.-Q. Chen, T. Du, and S. Liang, “Cascading impacts of global metal mining on climate change and human health caused by COVID-19 pandemic.,” Resources, conservation, and recycling, vol. 190, p. 106800, Mar. 2023.
Y.-C. Jang, G. Lee, Y. Kwon, J. Lim, and J. Jeong, “Recycling and management practices of plastic packaging waste towards a circular economy in South Korea,” Resources, Conservation and Recycling, vol. 158, p. 104798, Jul. 2020.
C. Feng, T. Lotti, R. Canziani, Y. Lin, C. Tagliabue, and F. Malpei, “Extracellular biopolymers recovered as raw biomaterials from waste granular sludge and potential applications: A critical review,” Science of The Total Environment, vol. 753, p. 142051, Jan. 2021.
P. Jagadeesh, S. Mavinkere Rangappa, S. Siengchin, M. Puttegowda, S. M. K. Thiagamani, R. G., M. Hemath Kumar, O. P. Oladijo, V. Fiore, and M. M. Moure Cuadrado, “Sustainable recycling technologies for thermoplastic polymers and their composites: A review of the state of the art,” Polymer Composites, vol. 43, no. 9, pp. 5831–5862, Sep. 2022.
C. C. Uzosike, L. H. Yee, and R. V. Padilla, “Small-Scale Mechanical Recycling of Solid Thermoplastic Wastes: A Review of PET, PEs, and PP,” Energies, vol. 16, no. 3, p. 1406, Jan. 2023.
Z. O. G. Schyns and M. P. Shaver, “Mechanical Recycling of Packaging Plastics: A Review,” Macromolecular Rapid Communications, vol. 42, no. 3, Feb. 2021.
T. Kolb, A. Schedl, H. Kerschbaumer, N. Niessner, H.-W. Schmidt, and B. Wilhelmus, “De‐Brominating Flame‐Retardant Polystyrene by Utilizing Basic Oxides in Chemical Recycling,” Chemie Ingenieur Technik, vol. 95, no. 8, pp. 1314–1322, Aug. 2023.
S. Musivand, M. P. Bracciale, M. Damizia, P. De Filippis, and B. de Caprariis, “Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis,” Energies, vol. 16, no. 13, p. 4917, Jun. 2023.
S. Schröter, T. Rothgänger, D. Heymel, and M. Seitz, “Concept of Catalytic Depolymerization of Polyolefinic Plastic Waste to High Value Chemicals,” Chemie Ingenieur Technik, vol. 95, no. 8, pp. 1297–1304, Aug. 2023.
J. Huang, A. Veksha, W. P. Chan, A. Giannis, and G. Lisak, “Chemical recycling of plastic waste for sustainable material management: A prospective review on catalysts and processes,” Renewable and Sustainable Energy Reviews, vol. 154, p. 111866, Feb. 2022.
H. Jeswani, C. Krüger, M. Russ, M. Horlacher, F. Antony, S. Hann, and A. Azapagic, “Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery,” Science of The Total Environment, vol. 769, p. 144483, May 2021.
A. Salisu and Y. Maigari, “Polystyrene and its recycling: a review,” in Material Society of Nigeria (MSN) Kaduna State Chapter Conference, 2021, pp. 195–202.
C. Marquez, C. Martin, N. Linares, and D. De Vos, “Catalytic routes towards polystyrene recycling,” Materials Horizons, vol. 10, no. 5, pp. 1625–1640, 2023.
J. C. Capricho, K. Prasad, N. Hameed, M. Nikzad, and N. Salim, “Upcycling Polystyrene,” Polymers, vol. 14, no. 22, p. 5010, Nov. 2022.
L. S. Leão, G. P. Spini, M. S. de França, and E. B. C. Costa, “Recycled expanded polystyrene (EPS) as an eco-friendly alternative for sand in rendering mortars,” Construction and Building Materials, vol. 414, p. 135018, Feb. 2024.
SHADRACK CHUKWUEBUKA UGWU and CHIZOBA MAY OBELE, “A mini-review on expanded polystyrene waste recycling and its applications,” World Journal of Advanced Engineering Technology and Sciences, vol. 8, no. 1, pp. 315–329, Feb. 2023.
J. C. Capricho, K. Prasad, N. Hameed, M. Nikzad, and N. Salim, “Upcycling Polystyrene,” Polymers, vol. 14, no. 22, p. 5010, Nov. 2022.
Drugplastic, “An Introduction to Advanced Plastic Recycling,” https://www.drugplastics.com/an-introduction-to-advanced-plastic-recycling/amp/, 2024. .
O. Dogu, M. Pelucchi, R. Van de Vijver, P. H. M. Van Steenberge, D. R. D’hooge, A. Cuoci, M. Mehl, A. Frassoldati, T. Faravelli, and K. M. Van Geem, “The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions,” Progress in Energy and Combustion Science, vol. 84, p. 100901, May 2021.
X. Jiang, T. Wang, M. Jiang, M. Xu, Y. Yu, B. Guo, D. Chen, S. Hu, J. Jiang, Y. Zhang, and B. Zhu, “Assessment of Plastic Stocks and Flows in China: 1978-2017,” Resources, Conservation and Recycling, vol. 161, p. 104969, Oct. 2020.
J. A. Conesa, S. S. Nuñez, N. Ortuño, and J. Moltó, “PAH and POP Presence in Plastic Waste and Recyclates: State of the Art,” Energies, vol. 14, no. 12, p. 3451, Jun. 2021.
M. Chanda, “Chemical aspects of polymer recycling,” Advanced Industrial and Engineering Polymer Research, vol. 4, no. 3, pp. 133–150, Jul. 2021.
S. Thiyagarajan, E. Maaskant-Reilink, T. A. Ewing, M. K. Julsing, and J. van Haveren, “Back-to-monomer recycling of polycondensation polymers: opportunities for chemicals and enzymes,” RSC Advances, vol. 12, no. 2, pp. 947–970, 2022.
G. W. Coates and Y. D. Y. L. Getzler, “Chemical recycling to monomer for an ideal, circular polymer economy,” Nature Reviews Materials, vol. 5, no. 7, pp. 501–516, Apr. 2020.
J. Huang, A. Veksha, W. P. Chan, A. Giannis, and G. Lisak, “Chemical recycling of plastic waste for sustainable material management: A prospective review on catalysts and processes,” Renewable and Sustainable Energy Reviews, vol. 154, p. 111866, Feb. 2022.
F. Zhang, F. Wang, X. Wei, Y. Yang, S. Xu, D. Deng, and Y.-Z. Wang, “From trash to treasure: Chemical recycling and upcycling of commodity plastic waste to fuels, high-valued chemicals and advanced materials,” Journal of Energy Chemistry, vol. 69, pp. 369–388, Jun. 2022.
G. Albor, A. Mirkouei, A. G. McDonald, E. Struhs, and F. Sotoudehnia, “Fixed Bed Batch Slow Pyrolysis Process for Polystyrene Waste Recycling,” Processes, vol. 11, no. 4, p. 1126, Apr. 2023.
K. I. Dement’ev, S. P. Bedenko, Y. D. Minina, A. A. Mukusheva, O. A. Alekseeva, and T. A. Palankoev, “Catalytic Pyrolysis of Polystyrene Waste in Hydrocarbon Medium,” Polymers, vol. 15, no. 2, p. 290, Jan. 2023.
A. M. Gonzalez-Aguilar, V. Pérez-García, and J. M. Riesco-Ávila, “A Thermo-Catalytic Pyrolysis of Polystyrene Waste Review: A Systematic, Statistical, and Bibliometric Approach,” Polymers, vol. 15, no. 6, p. 1582, Mar. 2023.
P. M. Mahapatra, S. Aech, S. R. Dash, U. P. Tripathy, P. C. Mishra, and A. K. Panda, “Co-pyrolysis of discarded bakelite with polystyrene to fuel: Thermokinetic, thermodynamic, synergetic analysis and batch pyrolysis studies,” Journal of the Energy Institute, vol. 110, p. 101336, Oct. 2023.
