COMPARISON OF WEAR AND HARDNESS BEHAVIOR OF NiP - NiPWS2 COATINGS


Abstract views: 0 / PDF downloads: 1

Authors

  • Şehriban KARATAŞ Sakarya University
  • Abdullah ULUĞ Sakarya University
  • Erhan DURU Sakarya University
  • Mehmet UYSAL Sakarya University

Keywords:

Ni-P Coatings, Ni-P-WS2 Coatings, Electrodeposition Coatings, Wear Resistance, Friction

Abstract

Wear resistance is a critical factor in various industries where components are subjected to
friction, wear and abrasion. In this paper, we investigate the fabrication and characterization of nickel
phosphorus (Ni-P) and nickel-phosphorus-tungsten disulfide (Ni-P-WS2) electroplating coatings, with a
particular focus on wear resistance and hardness properties. The focus of this work is to investigate the
wear resistance properties and investigate whether the hardness decreases or increases with the addition of
WS2 particles of these coatings and evaluate their potential in various applications. In the study, 2 different
coatings, Ni-P and Ni-P-WS2, were produced. In addition to the Ni-P-WS2 bath, WS2 particles were added
at a concentration of 0.1 g/L. The current density was 18 A/dm2 and the stirring speed, pH and temperature
were kept constant. The obtained samples were characterized by scanning electron microscopy (SEM) and
X-ray diffraction (XRD) analysis and the tribological behavior of the produced electrocoatings was studied.
The results show that the incorporation of WS2 nanoparticles into Ni-P coatings imparts excellent
tribological properties to the coating by combining the hardness and wear properties of Ni-P with the
lubricating properties of WS2 , further reducing friction and wear and increasing hardness. In this case, the
benefits of Ni-P and Ni-P-WS2 coatings can be utilized in a wide range of industries. In the automotive
sector, these coatings can be applied to engine components such as pistons, connecting rods and crankshafts
to increase their durability and reduce friction.

Downloads

Download data is not yet available.

Author Biographies

Şehriban KARATAŞ, Sakarya University

Metallurgical and Materials Engineering Departmant,Engineering Faculty, Turkey

Abdullah ULUĞ, Sakarya University

Metallurgical and Materials Engineering Departmant,Engineering Faculty,Turkey

Erhan DURU, Sakarya University

Metallurgical and Materials Engineering Departmant,Engineering Faculty, Turkey

Mehmet UYSAL, Sakarya University

Metallurgical and Materials Engineering Departmant,Engineering Faculty, Turkey

References

Mallory, G. O., & Hajdu, J. B. (1990). Electroless

Plating: Fundamentals and Applications. American

Electroplaters and Surface Finishers Society.

Zhou, Yi, et al. "Strategic Design of Clay‐Based

Multifunctional Materials: From Natural Minerals to

Nanostructured Membranes." Advanced functional

materials 29.16 (2019): 1807611.

Ma, C., S. C. Wang, and F. C. Walsh.

"Electrodeposition of nanocrystalline nickel–cobalt

binary alloy coatings: a review." Transactions of the

IMF 93.2 (2015): 104-112.

Yan, Liping, et al. "Preparation, corrosion resistance

and mechanical properties of electroless Ni-B/α-ZrP

composite coatings." Colloids and Surfaces A:

Physicochemical and Engineering Aspects 654

(2022): 130132.

Wojewoda-Budka, Joanna, et al. "Reactivity with tin

and corrosion resistance of electroless Ni-P and Ni

P-Re coatings plated on copper." Electrochimica

Acta 406 (2022): 139850.

Wojewoda-Budka, Joanna, et al. "Reactivity with tin

and corrosion resistance of electroless Ni-P and Ni

P-Re coatings plated on copper." Electrochimica

Acta 406 (2022): 139850.

Zhang, Zhijin, et al. "A Review of Icing and Anti

Icing

Technology

for

Lines." Energies 16.2 (2023): 601.

Transmission

Cortés-Contreras, Andrés, et al. "Simultaneous

cathodic and anodic electrodeposition of metal ions

from e-waste." Electrochimica Acta 464 (2023):

Gurrappa, Injeti, and Leo Binder. "Electrodeposition

of

nanostructured

characterization—a

coatings

review."

and

Science

their

and

Technology of Advanced Materials (2008).

Lopez, Miguel Bernal, and Jon Ustarroz.

"Electrodeposition of nanostructured catalysts for

electrochemical energy conversion: Current trends

and innovative strategies." Current Opinion in

Electrochemistry 27 (2021): 100688.

Taranu, Bogdan-Ovidiu, et al. "Simultaneous

precipitation and electrodeposition of hydroxyapatite

coatings at different temperatures on various metal

substrates." Coatings 12.2 (2022): 288.

Shapagina, Natalia A., and Vladimir V. Dushik.

"Application of electrophoretic deposition as an

advanced technique of inhibited polymer films

formation on metals from environmentally safe

aqueous solutions of inhibited formulations."

Materials 16.1 (2022): 19.

Suchikova, Yana, Sergii Kovachov, and Ihor

Bohdanov. "Formation of oxide crystallites on the

porous

GaAs surface by electrochemical

deposition." Nanomaterials and Nanotechnology 12

(2022): 18479804221127307.

Jhalak, and Dishant Beniwal. "A Review on Nickel

Composite

Coatings

Electrodeposition."

Deposited

Coating

by

Jet

Materials:

Computational Aspects, Applications and Challenges

(2023): 333-358.

Li, You-gang, et al. "Electro-deposition behavior in

methanesulfonic-acid-based lead electro-refining."

Journal of Sustainable Metallurgy 7 (2021): 1910

Tian, Meijuan, et al. "Properties of electroless thick

nickel–phosphorus coating on SiCp/Al composite

surface in acidic conditions." Journal of Materials

Science 58.4 (2023): 1886-1904.

Zhao, Q., and Y. Liu. "Electroless Ni–Cu–P–PTFE

composite

coatings

and their anticorrosion

properties." Surface and Coatings Technology 200.7

(2005): 2510-2514.

Lelevic, Aleksandra, and Frank C. Walsh.

"Electrodeposition of NiP alloy coatings: a review."

Surface and Coatings Technology 369 (2019): 198

Chintada, Vinod Babu, Ramji Koona, and M. V. A.

Raju Bahubalendruni. "State of art review on nickel

based electroless coatings and materials." Journal of

Bio-and Tribo-Corrosion 7.4 (2021): 134.

Li, X., et al. (2018). Electroless Nickel-Phosphorus

Coatings: A Review of Structure, Properties, and

Applications. Journal of Materials Science &

Technology, 34(2), 191-201.

He, Y., et al. "An electrodeposited Ni-P-WS2 coating

with combined super-hydrophobicity and self

lubricating properties." Electrochimica Acta 245

(2017): 872-882.

Lixia, Ying, et al. "Preparation and properties of

electroless plating wear-resistant and antifriction

composite coatings Ni-P-SiC-WS2." Rare Metal

Materials and Engineering 44.1 (2015): 28-31.

Ni, Ming, et al. "A novel self-lubricating Ni-P-AlN

WS2 nanocomposite coating." Materials Research

Express 6.11 (2019): 116413.

He, Yang. Electrodeposition of nickel-based

composite coatings for tribological applications.

Diss. University of Southampton, 2015.

Lee, SM et al. (2018). Effects of WS2 nanoparticles

on tribological properties of Ni-P-WS2 composite

coatings. Surface and Coating Technology, 349, 29

Zhou, Yi, et al. "Strategic Design of Clay‐Based

Multifunctional Materials: From Natural Minerals to

Nanostructured Membranes." Advanced functional

materials 29.16 (2019): 1807611.

Downloads

Published

2025-01-14

How to Cite

KARATAŞ, Şehriban, ULUĞ, A., DURU, E., & UYSAL, M. (2025). COMPARISON OF WEAR AND HARDNESS BEHAVIOR OF NiP - NiPWS2 COATINGS. International Journal of Advanced Natural Sciences and Engineering Researches, 7(11), 220–226. Retrieved from https://as-proceeding.com/index.php/ijanser/article/view/2405

Issue

Section

Articles